PLUG VALVES

METAL TYPE LUBRICATED PLUG VALVES

FEATURES

FEATURE
① NO Leakage (Bubble Tight Shut Off)
tapered plug valve assures positive bubble tight shut off with unique sealant system.
② NO Maintenance (In-Line Adjustment)
tapered plug valve can be adjusted with the valve line, extending the service life f the valve.
③ No Dead Space
Slutty or sludge don’t accumulate anywhere in a valve, because valve has no dead cavity i the flow path.

Easy of operation
Positive quarter turn on operation is quick and sure.

PRESSURE BALANCE SYSTEM
For maintaining pressure equalization between plug port and bottom of the plug, and for insuring the pressure above the plug the same as or greater in the plug port, pressure balance system design is available.

BENEFIT

PRESSURE BALANCED TYPE AS STANDARD
BLOWOUT-PROOF STEM STRUCTURE

BLOWOUT-PROOF STEM STRUCTURE
1) Freedom from seizure by long service operation
2) Consistent Torque

SELF CLEANING SEATING SURFACE
The turning action of plug valve scrapes off any ingredient which may accumulate the plug surface in a closed position.

Non-Lubricated TEFLON SLEEVED PLUG VALVES

CHARACTERISTIC

1. Completely No Leakage.
① As taper plug and Teflon sleeve contact face to gives absolutely no leakage.
② Steam Seal Structure has been designed to complement the controversial point of other plug valves.
③ As Steam Seal is not exposed externally it doesn’t rust and able to increase life span.

2. No Dead Space
No dead space in the fluid way can allow control of open / close function and gives semi-permanent life span.

3. 3. Few Maintenance and Repair needed
① No dead space doesn’t allow fluid to be clogged up.
② Re-adjusting of Seal Pressure by using Adjusting-Bolt After abrasion of Teflon Sleeve gives semi-permanent sealing function.
③ Metal lib around port has Self-Cleaning function to control steamy and solid material liquid.
④ Top Entry type can allow to be repaired on line.

MATERIAL & PRESSURE & SIZE RANGE

BODY / PLUG : ASTM A216 WCB, WCC, ASTM A351 CF8M, CF3M, CF8, CF3, CN7M, CD4M
: ASTM A352 LCB
SLEEVE : PTFE, RTFE, TFM 4215

– ANSI 150LB 1/2″ ~ 24″
– ANSI 300LB 1/2″ ~ 24″
– ANSI 600LB 1/2″ ~ 12″
– JIS 10K, 20K, 40K
– DIN PN10, PN16, PN25, PN40

Main Fluid : Toxic, Flammable, Explosive Fluid Line and No-leakage required Line

plug-valve-1
plug-valve-2
plug-valve-3
plug-valve-5
plug-valve-7
plug-valve-7
plug-valve-8
plug-valve-9
plug-valve-10
plug-valve-11
plug-valve-12
plug-valve-13
plug-valve-14
plug-valve-15
If you have any question, then feel free to contact us.